Medical technology - environmental simulation
The Phoenix Testlab environmental simulation laboratory has state-of-the-art equipment and expert staff for testing complete units in the medical technology sector. We plan your tests reliably and perform them with maximum precision.
Tests in the fields of vibration, temperature, climate, surface, corrosion, etc. are carried out in the environmental simulation laboratory.
DIN EN ISO/IEC 17025:2005
DIN EN ISO 9001:2015 and
DIN EN ISO 14001:2015
Extract from the relevant standards
- DIN EN 60068-2-6 (sine vibration test)
- DIN EN 60068-2-2 (climatic test)
- DIN EN 60068-2-14 (rapid change in temperature)
Environmental simulation laboratory equipment
Electrodynamic oscillation systems (option: with temperature/climatic testing)
- Class 1: 20 kN - 35 kN
- Class 2: 55 kN
- Class 3: 105 kN
- Class 4: 200 kN
- Temperature and climate cabinets: (0.5 m³ to 2 m³), option: sunlight, noxious gas
- Temperature and climate chambers (accessible): (4.5 m³ to 24 m³), option: sunlight
- Shock cabinets: air/air (on request: climate option)
- Class 1: 120 l
- Class 2: 500 l
- Class 3: 7 m³
- Corrosion changeover troughs: 0.5 m³ - 1 m³
- Corrosion changeover chambers:
- Class 1: 1 m³
- Class 2: up to 3 m³
- Class 3: 11 m³
- IP degree of protection test
- Dust chamber (DIN EN 60529)
- Wet room (area of 25 m²)
- Inflammability test stand
- Electrical tests: high-voltage and insulation test, parameter tests
- Monitoring systems for test object monitoring and control (contact monitoring, actuation equipment, electronic loads, etc.)
Test object control and monitoring systems; electric, pneumatic, and mechanical tests are performed at Phoenix Testlab as part of Monitoring & Bench Design.
Customer-specific applications are part of our daily work. Phoenix Testlab uses proven elements for this task. Depending on the task, they are designed for a vibration test under temperature and climatic conditions or for a dedicated temperature change test.
Monitoring instruments are selected in close cooperation with our customers. Within a very short period of time, actuation equipment for locking systems (power window components) or electrical load change test stands for high-current consumers can be implemented, for example.