Information technology - environmental simulation

Phoenix Testlab is accredited for all the relevant standards of the Low Voltage Directive 2014/35/EC in the field of information technology.

Environmental simulation tests, such as temperature tests, vibration, and corrosion are included in the range of services offered by Phoenix Testlab, ensuring that all regulatory and manufacturer-specific test requirements can be met.


Accreditations: DIN EN ISO/IEC 17025:2018
Certifications: DIN EN ISO 9001:2015 and DIN EN ISO 14001:2015

Typical Standards for the applications listed above
  • DIN EN 60529 (IP degree of protection test)
  • DIN EN 60068-2-6 (sine vibration test)
  • DIN EN 60068-2-2 (climatic test)
  • DIN EN 60068-2-14 (rapid change in temperature)
  • DIN EN 60068-2-57 (salt spray)
Battery test laboratory equipment

Electrodynamic oscillation test systems with climatic or temperature testing from 20 kN to 300 kN

  • Oscillation systems with and without sliding table
  • Various clamping devices – head expander, cube, H-piece, etc.
  • Additional mounting piece to increase the clamping surface for large parts
  • Maximum temperature range: -70°C to +180°C
  • Possible relative humidity 20% to 98%

Construction (Bench Design)

  • 2D/3D construction
  • CAD simulation
  • up to the fixture construction

Temperature and climate chambers: 0,3 m³ to 25 m³

  • Maximum temperature range: -70°C to +180°C
  • Possible relative humidity 20% to 98%
  • Option: sunlight simulation, noxious gas, condensation, special tests in accordance with various manufacturer specifications (on request)

Shock cabinets: air/air (on request: climate option) 120 l up to 7 m³

  • Corrosion changeover chambers from 0,5 m³ to 11m³
  • Option: special tests in accordance with various manufacturer specifications (eg. Nissan, Ford, VW Group, VDA, etc.)

IP degree of protection test (EN 60529, ISO 20653, and AK-LV)

  • Contact and foreign matter protection: IP 1X to 6X IP ( 1st index)
  • Dust test : IP 5X IP 6X up ( including additional letters)
  • Water protection : IP X1 to X7 IP (8) and IP X9K ( 2nd index)
  • Special tests on request

Acoustic measurement space:

  • sound power measurement or Squeak & Rattle in a half-space of class 1

Surface tests

  • Examination of decorative and functional surfaces
  • Determination of hardness , abrasion resistance, color, gloss and adhesion
  • Determination of the burning behavior of materials used in automotive interior trim
  • Test of resistance to chemical stress

Electrical tests

  • according to customer specifications and / or technical standards

Monitoring systems for test object monitoring and control

  • Data acquisition and evaluation of customer specifications
  • multichannel injection of specific current profiles
  • automat. test rigs for operation of mechanical components
  • and much more.

Monitoring & bench design

  • For controlling and monitoring of test samples e.g. resistance-monitoring by micro-cut, automatic button-pushing systems, electrical charging & loading systems
  • Standardized measurement procedures for recording analog measurements
  • Automatic optical monitoring systems
  • Monitoring of digital signals e.g. CAN, LIN, Ethernet, RS232
  • Simulator of GPS signal