Medical technology

Phoenix Testlab is your competent and reliable partner for EMC tests for electrical products in medical technology.

We have developed these areas into a fixed sector. Our global customers value our focus and our expertise in this field.

Interface testing is a fixed part of our daily work and is performed by our engineers in reproducible tests and test environments.


Accreditations: DIN EN ISO/IEC 17025:2018
Certifications: DIN EN ISO 9001:2015 and DIN EN ISO 14001:2015

Typical Standards for the applications listed above
  • EN 60601-1-2 (product range standard for medical equipment)
  • DIN EN 61326-2-6 (In-vitro diagnostic devices)
  • DIN EN 12184 (product range standard for electrically powered wheelchairs)
  • DIN EN 55032 and DIN EN 55011 (radiated and conducted noise emission)
  • DIN EN 61000-4-2 (ESD)
  • DIN EN 61000-4-3 (radiated noise immunity)
  • DIN EN 61000-4-4 (burst)
  • DIN EN 61000-4-5 (surge)
  • DIN EN 61000-4-6 (high frequency, asymmetrical)
  • DIN EN 61000-4-11 (voltage dips)
EMC test laboratory equipment
  • Six anechoic chambers
    • Measuring paths of 3 m/5 m
    • Emission measurement up to 110 GHz
    • Field generation (industry) up to 40 V/m (up to 6 GHz)
    • Field generation (automotive) up to 600 V/m (up to 18 GHz)
  • Open area test site with up to 10 m measuring path
  • Conducted noise emission and noise immunity in the shielded chamber
  • Noise emission of the network harmonics for single/three-phase dev. up to 32 A
  • Noise immunity to network harmonics for single/three-phase dev. up to 32 A
  • Ring wave tests up to 7.8 kV
  • Surge tests up to 7.4 kV
  • Burst tests up to 4.8 kV
  • ESD tests up to 30 kV, even under constant climate
  • Vehicle pulse test sites
  • Bulk Current Injection (BCI)
  • Stripline, Triplate, TEM cell
  • Fiber optic interfaces for various bus systems
  • Standardized measuring procedure for recording analog measured values
  • Simulators for GSM, UMTS, LTE, Bluetooth®, DECT and GPS
  • Acoustic analyzers
Monitoring media equipment
  • Reproducible constructions on pre-assembled mounting systems
  • Standardized measuring procedure for recording analog/digital measured values
  • Optical and acoustic monitoring
  • Optical speed detection system
  • System for measuring illuminance
  • Optical probes
  • Pneumatic finger for pneumatic actuation of buttons